昆山荣仕杰智能装备科技有限公司
苏ICP备15033058号
网站建设：中企动力昆山
公司新闻
公司新闻
行业新闻
行业新闻
荣仕杰螺母点焊机的优点！
分类：
公司新闻
2019/10/22
螺母点焊机的有哪些卖点呢?在螺母点焊机的1个焊接循环内科同时焊接多个焊点，一次能焊几个个焊点，在于螺母点焊机对每一凸点能施加压力的均衡电极力和焊接瞬时电流大小，除此之外还有哪些有点呢?
1、因为能用较小的凸点同时焊接多点，故可获得变形小的焊接构件。
2、因为能够将凸点设定于1个零部件上，因此能够很大程度地减少另一个零部件露出表面层的痕迹。
3、因为焊接瞬时电流聚集在凸点上，并且不存在通过相邻焊点的分流问题，因此能够选用较小的搭接量和较小的点距。
4、凸焊点的位置比点焊点的位置更精确，并且因为凸点大小均衡，因此凸焊焊点质量更稳定，因而，凸焊焊点的尺寸可比电焊焊点小。
5、凸焊选用的平行面大螺母电极，其受热和磨损程度比点焊螺母电极小得多，增加了使用寿命因而节省了修型和拆换螺母电极時间，并减少了螺母电极维护保养成本 。
之上材料由中频点焊机生产商昆山荣仕杰 智能装备总结发表。
英文版：
What are the selling points of the nut spot welding machine? In the welding cycle of the nut spot welding machine, multiple welding points are welded at the same time, and several welding points can be welded at one time. The nut spot welding machine can apply pressure to each bump. What is the balance of the electrode force and the instantaneous current of the welding?
1. Since a plurality of points can be welded at the same time with a small bump, a welded member having a small deformation can be obtained.
2. Since the bump can be set on one component, the trace of the exposed surface layer of the other component can be greatly reduced.
3. Since the welding instantaneous current is concentrated on the bumps, and there is no problem of shunting through adjacent solder joints, a smaller amount of overlap and a smaller pitch can be selected.
4. The position of the projection joint is more accurate than the position of the spot weld, and because the bump size is balanced, the quality of the projection weld is more stable, and therefore, the size of the projection weld can be smaller than that of the weld.
5, the parallel welding large nut electrode used for projection welding, its heat and wear degree is much smaller than the spot welding nut electrode, which increases the service life, thus saving the time for repairing and replacing the nut electrode, and reducing the nut electrode maintenance. cost.
The above materials were published by the medium frequency spot welding machine manufacturer Kunshan Rongshijie intelligent equipment.